Thalos turns any phone into a safety inspector for the grid. A lineworker, a pipeline crew, a plant operator reads a scene — Thalos spots the hazard, cites the exact standard, and on critical infrastructure cites it twice: OSHA, and the federal standard that governs the asset.
One walk across the assets: a substation, a platform at elevation, a pipeline right-of-way — each hazard caught, cited to the exact standard, and the physical-security condition flagged honestly. A review cut, 43 seconds.
A lineworker, a pipeline crew, or a plant operator reads a scene — a substation bay, a platform at height, a trench on the right-of-way — on the phone they already carry. No phone on screen; the detection reads on the scene itself.
AI reads it in real time — energized-equipment boundaries, unprotected edges at elevation, open excavations, blocked working clearances — and shows the live safety state of the asset.
Findings map to the exact rule — OSHA 1910.269, NFPA 70E, OSHA 1910.28, the excavation standard — in plain language. On critical infrastructure, it dual-cites OSHA and the governing federal standard.
Thalos generates the work order and tracks it to closure, and logs every finding with the annotated scene, its citation where a rule applies, and a timestamp — an audit-ready record for the EHS lead, the federal owner, and the reliability team.
A substation, a transmission corridor, a pipeline right-of-way, a generation asset: these drift between inspections like any site, but the consequence of a bad day is measured in a region's power, water, or fuel. Thalos gives every asset a continuous, documented safety walk so the small things get caught while they're still small — across one substation or an entire portfolio.
On federal and critical-infrastructure assets, one worker-safety standard isn't the whole story. Thalos dual-cites a finding to OSHA and the governing federal standard — so the record holds up to the EHS lead, the federal owner, and the auditor at once.
Paulie answers critical-infrastructure safety questions with a real citation every time — across 160+ codebooks. Below is a simulation with shortened answers; in the app, answers are fuller. Try one:
Across substations, transmission corridors, generation assets, and pipeline right-of-way. A few of the most common:
A worker inside the approach boundary of energized equipment without the required protection.
Fall exposure on a platform, deck, or structure at height — dual-cited on federal projects.
An open trench along the pipeline right-of-way without a protective system.
Energy isolation missing before work on machinery or energized systems.
Storage or clutter within the required working space of a panel or switchboard.
An obstructed exit or egress path in an occupied control or plant space.
Entry conditions at a vault, tank, or valve pit that need a permit and attendant.
A perimeter or access condition — flagged, not cited. Reviewed against NERC CIP-014 physical-security principles; the regulation corpus does not yet carry security-specific codes.
Every citation is grounded in a real standard — OSHA general industry and construction, the electrical-safety and fall-protection standards, and the federal standard that governs the asset. A sample of coverage:
Electric power generation, transmission & distribution — the utility-specific OSHA standard.
Electrical Safety in the Workplace — arc-flash boundaries and safe work practice.
Walking-working surfaces and construction fall protection.
USACE Safety & Health Requirements — the federal-project standard, dual-cited with OSHA.
Gas and hazardous-liquid pipeline safety — the governing federal pipeline standard.
Excavations & protective systems on the right-of-way.
The control of hazardous energy (LOTO) and permit-required confined spaces.
Nuclear generation — Nuclear Regulatory Commission requirements.
Mine Safety & Health — for mining and mineral-processing assets.
Offshore energy — Bureau of Safety and Environmental Enforcement.
National Electrical Code — installation and clearance requirements.
Physical security of critical substations — used as a flagging principle only, never a fabricated code. The security lane is emerging.
Thalos is usage-based — you pay per safety analysis, not per seat. Estimate your monthly usage below.
Metered at $0.45 / analysis and $0.05 / Paulie question. Volume pricing kicks in above 25k analyses/mo — talk to us for a portfolio rate.
For context: a single serious OSHA violation runs ~$16,550, and unplanned downtime on a critical asset is measured in a region's service. One caught hazard can outweigh a year of usage.
Get started now: point Thalos, on your phone, at a substation bay, a platform at height, a right-of-way, and see what it catches, cites, and assigns.
3 free safety checks. No credit card required.