Thalos turns the phone already in every worker’s pocket into a hazard detector. Snap a photo of the site — it spots the hazard, cites the exact rule behind it, and drives the fix to closure. No new hardware, no sensors.
One walk through the site: an unprotected edge, an open trench, a missing tie-off — each caught, cited to the exact code (OSHA and EM 385), and assigned. Narrated.
A field worker snaps a photo of the work area on the phone they already carry. No app training, no wearables.
AI reads it in real time — fall exposure, excavation, electrical, scaffolds, ladders, PPE, housekeeping — and shows the live safety state of the site.
Findings map to the exact rule — the OSHA 1926 standard, the EM 385 chapter, the consensus code — in plain language.
Thalos generates the work order and tracks it to closure, and logs every finding with the annotated photo, its citation where a rule applies, and a timestamp — an audit-ready record for OSHA, the GC, and the federal inspector. No scrambling the night before an inspection.
On USACE, NAVFAC and DoD work, compliance runs on both OSHA 1926 and the Army Corps’ EM 385-1-1. Thalos carries the complete EM 385 (2024 ed., 37 chapters) alongside OSHA and issues a dual citation on federal jobs — no competitor does this. It’s the difference between a flag and an audit-ready record on ~$45B/yr of federal construction.
Paulie answers construction safety & compliance questions with a real citation every time — across 160+ codebooks, OSHA and EM 385. Try one:
Tap a question to see a simulation of Paulie’s answer: shortened, with the exact citation and a one-tap task. In the app, answers are fuller.
Across 130+ hazard types and 3,600+ mapped regulations. A few of the most common:
Worker at height with no guardrail, tie-off, or fall-arrest system.
Excavation without a protective system — sloping, shoring, or a trench box.
Live electrical parts exposed; missing covers or guarding.
Missing planks, guardrails, or improper access on a scaffold.
Wrong angle, missing extension above the landing, or damaged rails.
No hard hat, hi-vis, eye protection, or fall harness where required.
Uncontrolled dust from cutting, grinding, or demolition.
Dual-cited against the Army Corps manual on federal jobs.
Every citation is grounded in a real rulebook — federal, consensus, and jurisdictional. For construction alone, coverage spans OSHA, the Army Corps’ EM 385, the ANSI/ASSP and NFPA consensus standards, the model building & fire codes, and the crane, ladder, and electrical codes inspectors actually cite.
Construction — the core standard, Subparts A–CC (falls, excavation, electrical, cranes, confined space).
General Industry — the overlapping standards that apply on many sites.
The Army Corps manual governing USACE / NAVFAC / DoD federal construction (2024 ed., 37 chapters).
Construction & demolition operations — the consensus safety series.
The Fall Protection Code — systems, anchorages, rescue.
Ladders (A14) and cranes, hoists & rigging (B30).
National Electrical Code and Electrical Safety in the Workplace.
Hot work / cutting & welding, and construction fire safety.
The International Building & Fire Codes adopted across jurisdictions.
Health criteria & recommended limits — silica, noise, respiratory.
Temporary traffic control & work-zone safety for road/civil work.
OH&S management, environmental (SWPPP/RCRA), and Cal/OSHA + 21 state-plan standards.
Thalos is usage-based — you pay per safety analysis, not per seat. Estimate your monthly usage below.
Metered at $0.45 / analysis and $0.05 / Paulie question. Volume pricing kicks in above 25k analyses/mo — talk to us for an enterprise rate.
For context: a single serious OSHA violation runs ~$16,550, and a willful/repeat citation up to ~$165,514. One caught hazard can outweigh a year of usage.
Get started now: point Thalos, on your phone, at a leading edge, an excavation, a panel, and see what it catches, cites, and assigns.
3 free safety checks. No credit card required.